Published at Friday, 01 March 2019. Bar stools. By Sasya.
make sure it is an upholstery grade fabric and check with your salesperson to see how much material will be needed for each stool. Stools with backs generally require 2 yards per stool. whereas backless or metal back stools generally require 1 yard per stool. If your fabric has a repeating pattern that you want to match. it may be necessary to provide more fabric so the factory can match the placement of a design from one stool to the other.
Metal Bar Stools: Metal bar stools are often available in dozens of finishes. Look for a powder-coated and baked on finish. These finishes are by far more chip and scratch resistant than "spray painted" finishes. In addition to a more durable surface a powder coated finish is much less likely to be damaged by cleaning products than a painted finish.
Metal or Wood? This is a good question. If you ask 10 retailers. you`ll get 10 responses. In my opinion. wood bar stools are prone to problems not encountered with welded metal bar stools. Due to the soft nature of wood (when compared to steel). screws and joints tend to come loose over time- especially wood with arms. The constant outward stress on the arms can loosen the attachment points resulting in a loose feel. Legs and stretchers (horizontal support bars) can also become loose over time resulting in an unstable and potentially dangerous bar stool. Still. there are decorating situations in which only wood will work.
Any content, trademark’s, or other material that might be found on the golftodaynetwork.com website that is not golftodaynetwork.com’s property remains the copyright of its respective owner/s. In no way does golftodaynetwork.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 golftodaynetwork.com. All Rights Reserved.